Component Identification - Honda EU26i Manuel De L'utilisateur

3. COMPONENT IDENTIFICATION

<STAND TYPE>
FRONT HANDLE PIPE
CONTROL PANEL
(See page 14)
<WHEEL TYPE>
CONTROL PANEL
(See page 14)
NOTE:
The generator may become
unstable if all four wheels are not
firmly on the ground.
Confirm that all four wheels are
firmly on the ground before
operation.
12
FRONT COVER
GROUND TERMINAL
Raise the stopper lever and slide
the stopper in the direction of the
arrow so that it enters the hole in
the wheel and then lower the
stopper lever.
Confirm that the wheel is locked.
STARTER GRIP
STOPPER