Specifications; Plug Configurations; Electrical Rating Charts; Dimensions - Hatco SW Série Manuel D'installation Et D'utilisation

English

Plug Configurations

Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the application.
WARNING
ELECTRIC SHOCK HAzARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage, size,
and plug configuration. If plug and receptacle do not match,
contact a qualified electrician to determine and install the
proper voltage and size electrical receptacle.
NOTE: The specification label is located on the bottom back
of the unit. See label for serial number and verification
of unit electrical information.
Electrical Rating Chart
Model Voltage
SW2-7QT
SW2-11QT
NOTE: Shipping weight is an estimate and includes packaging.

Dimensions

Model
SW2-7QT
(648 mm)
SW2-11QT
(648 mm)
† If unit is equipped with options, add the following to Depth (B):
Upper Shelf: add 1" (25 mm)
Sign Holder: add 1" (25 mm)
Backsplash: add 1" (25 mm)
Form No. SWm-0914
Watts
120 750
120 750
Width Depth
(A) (B)†
25-1/2" 15-3/8"
(389 mm)
25-1/2" 15-3/8"
(389 mm)
A
D
Front View
NOTE: Receptacle not supplied by Hatco.
Amps Plug Configuration
6.3 NEma 5-15P
6.3 NEma 5-15P
Height Footprint
(C)* Width (D)
10-3/4"
(272 mm) (598 mm)
10-3/4"
(272 mm) (598 mm)
* If unit is equipped with options, add the following to Height (C):
Upper Shelf: add 16-1/4" (412 mm)
Sign Holder: add 15-1/4" (387 mm)
Backsplash: add 13-1/16" (332 mm)
5

SPECIFICATIONS

NEMA 5-15P
Plug Configurations
Shipping Weight
28 lbs. (13 kg)
28 lbs. (13 kg)
Footprint
Depth (E)
23-1/2" 13"
(332 mm)
23-1/2" 13"
(332 mm)
B
C
E
Side View