Tools And Materials; Before You Begin - Kohler 1196030-2-B Guide D'installation Et D'entretien

Tools and Materials

Before You Begin

NOTICE: Adequate floor support must be provided. Note the model number located on the heater side
of the bath, then visit the product page at www.kohler.com for additional information.
NOTICE: Do not support the load weight of the bath by the rim.
NOTICE: Confirm adequate support for a rim-mounted faucet; large faucets that may be inadvertently
used as a means of support are not appropriate or safe for this installation.
Inspect the bath before you begin installation. If there is damage, do not install the bath; contact
your dealer.
When planning the installation area, provide access to all final plumbing connections for servicing.
For undermount installations, an undermount kit is required.
Kohler Co.
Silicone Sealant
3
Plus:
• Conventional woodworking tools
and materials
• Large-head galvanized nails
• Drop cloth
• Construction adhesive (optional)
• Cement or mortar (optional)
• 2x4s or 2x6s
• Water-resistant wallboard
• Finished wall material
1196030-2-B