Kohler 1196030-2-B Guide D'installation Et D'entretien page 5

Cement or Mortar Bed
2. Install the Bath
NOTE: Some models are equipped with support feet; some models have molded supports.
Choose the installation method that best applies to your particular installation. Follow the
appropriate instructions.
Option 1: Cement or Mortar Bed
NOTICE: Do not use gypsum cement or drywall compound, as these materials will not provide a durable
bond.
Spread a 1" (25 mm) to 2" (51 mm) layer of cement or mortar on the subfloor.
With help, carefully lift the bath into place in the bed material.
Verify the bath is level. Reposition or shim as needed.
Option 2: Construction Adhesive
Apply a generous amount of high-quality construction adhesive to the bottom of the support feet or
molded supports.
With help, carefully lift the bath into position.
Verify the bath is level and resting on all supports. Reposition or shim as needed.
Install the Plumbing
Connect the drain tailpiece to the trap.
Install the faucet valve.
Check the drain connections for leaks.
Kohler Co.
Spread a 1" (25 mm)
to 2" (51 mm) layer.
Construction Adhesive
5 1196030-2-B