Packing List - Ego Power+ HT2400E Manuel De L'opérateur

◾
Replace the blade if it is bent or cracked. An
unbalanced blade causes vibration that could damage
the motor drive unit or cause personal injury.
◾
If the equipment should start to vibrate abnormally,
stop the motor and check immediately for the cause.
Vibration is generally a warning of trouble.
◾
The trimmer shall be used to cut stems less than
(22mm) thick.
◾
Trim only in daylight or in good artificial light.
◾
Remove or disconnect battery before servicing,
cleaning, or removing material from the hedge trimmer.
◾
Do not wash with a hose; avoid getting water in motor
and electrical connections.
◾
When servicing use only identical replacement parts
listed in this manual. Use of parts which do not meet
the original equipment specifications may lead to
improper performance and compromised safety.
◾
Follow instructions for lubricating and changing
accessories.
◾
Keep handles dry, clean and free from oil and grease.
◾
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
SAVE THESE INSTRUCTIONS!
SPECIFICATIONS
Voltage
No-Load Speed
Blade Length
Cutting Capacity
Recommended Operating Temperature 0°C-40°C
Recommended Storage Temperature
Weight (without battery pack)
Measured sound power level L
Sound pressure level at
operator's position L
PA
Guaranteed sound power level L
(according to 2000/14/EC)
56 V
1300 /min
61 cm
22 mm
-20°C-70°C
2.79 kg
90.65 dB(A)
K=3.12 dB(A)
WA
83 dB(A)
K=2.5 dB(A)
94 dB(A)
WA
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E
Rear Handle
Vibration a
h
Front Handle
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.

PACKING LIST

PART NAME
Hedge Trimmer
Blade Guard
Operator's manual
DESCRIPTION
KNOW YOUR HEDGE TRIMMER (Fig. A)
1. Battery-release Button
2. Rear Handle
3. Rear Switch Lever
4. Front Handle
5. Front Switch Lever
6. Hand Guard
7. Blade
8. Tip Protector
9. Blade Guard
10. Ejection Mechanism
11. Mounting Slot
12. Electric Contacts
13. Latch
WARNING:
The safe use of this product requires an
understanding of the information on the tool and in this
operator's manual, as well as knowledge of the project
you are attempting. Before use of this product, familiarize
yourself with all operating features and safety rules.
EN
1.119 m/s
2
K=1.5 m/s
2
1.761 m/s
2
K=1.5 m/s
2
QUANTITY
1
1
1
7