Mounting The Unit On The Wall - DENTAURUM AIRVAC 2002 Mode D'emploi

4.2

Mounting the unit on the wall

Use a spirit level and the drilling template supplied to ensure that the mounting holes are in
the correct position:
• The mounting position on the wall should be dry and able to withstand the weight of the unit.
• Position the drilling template and mark the three given drill holes on the wall with a pencil
through the template. The position can be checked with a spirit level.
• Drill holes at the three marks using a ø 6 mm masonry drill. Insert the rawlplugs and screw
in the two upper screws so that the heads still protrude approx. 2 – 3 mm (illus. 1).
Illustration 1: Screwing the three fixing screws into the wall

Caution:
Plasterboard rawlplugs should be used to mount the unit onto plaster or plasterboard walls.
Check the load capacity of the rawlplug!
2 – 3 mm
Wall
Screw
airvac 2002  en
EN
19