Inspecting Wiring And Connectors; Inspecting Propeller - Yamaha F150 Manuel De L'utilisateur

EMU29116

Inspecting wiring and connectors

 Inspect that each connector is engaged se-
curely.
 Inspect that each ground lead is properly
secured.
EMU41671

Inspecting propeller

EWM02681
WARNING
You could be seriously injured if the en-
gine accidentally starts when you are near
the propeller. Before inspecting, remov-
ing, or installing the propeller, move the
control lever to the neutral position, turn
the main switch to the "
remove the key, and remove the clip from
the engine shut-off switch. Turn off the
battery cut-off switch if your boat has one.
Do not use your hand to hold the propeller
when loosening or tightening the propeller
ZMU07779 nut. Place a block of wood between the anti-
cavitation plate and the propeller to prevent
the propeller from turning.
Checkpoints
 Check each of the propeller blades for ero-
sion from cavitation or ventilation, and oth-
er damage.
 Check the propeller shaft for damage.
 Check the splines for wear and damage.
 Check for fish line tangled around the pro-
peller shaft.
ZMU07996
Maintenance
" (off) position,
ZMU07854
89