Engine Warm-Up Indicator; Engine Synchronization Indicator; Overheat Alert; Low Oil Pressure-Alert - Yamaha F150 Manuel De L'utilisateur

EMU41651

Engine warm-up indicator

This indicator appears while the engine is be-
ing warmed up and goes off when warming-
up is finished.
EMU41661

Engine synchronization indicator

In twin types, this display appears while the
engines are under engine synchronization
control. It goes off when engine synchroniza-
tion control is released.
EMU41683

Overheat alert

If the engine temperature rises too high while
cruising, the pop-up window will appear.
Press the " " (set) button to change to nor-
mal display, and the overheat-alert indicator
will start to blink. The engine speed will auto-
matically decrease to about 2000–3500
r/min.
Instruments and indicators
ZMU07236
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01594
NOTICE
 Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
ZMU07237
 Do not continue to operate the engine if
an alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU41692

Low oil pressure-alert

If the engine oil pressure drops too low, the
pop-up window will appear. Press the "
(set) button to change to normal display, and
the low oil pressure-alert indicator will start to
blink. The engine speed will automatically de-
crease to about 2000–3500 r/min.
ZMU07238
ZMU07239
"
41