EdilKamin KIKKA PLUS Installation, Usage Et Maintenance page 45

SETTING THE THERMOSTAT-TIMER
Press the button for a few seconds and scroll down the
parameters in the display using the same button until it displays
the term "SLot" and confi rm with the
This sub-menu allows you to set various time zones for the cor-
rect operation of the system with the timer programming active
(P on).
To activate the functions see the previous paragraph.
With the and buttons you can select the day of the
week and set the times for the stove to switch itself ON and
OFF.
Using the you can confi rm the settings (day of week, time
for the stove to switch itself ON and OFF).
By selecting the day of the week, as described above, use "SET"
and confi rm.
For the day of the week selected, you can set switch-on "on A"
and switch-off "off A" and also set the room "SEt A". You can
set up to a maximum four daily time slots(A, b, c, d).
WARNING: if you do not wish to use all the time slots schedu-
led for the day, enter the ignition ON and OFF within the same
schedule.
To speed up the programming operations, you can copy the daily
schedule for the other days of the week.
Select the day of week that you want to copy, confi rm, then
select the message "coPy" on the display and confi rm.
Select the day of the week in which you want to copy the daily
schedule and confi rm.
With the and buttons select the message "PASt"
and confi rm.
INSTRUCTIONS FOR USE
button.
- 45
ADJUSTING THE FLAME
We recommend that this setting is only modifi ed by the
DEALER.
It allows you to correct the calibration of the stove and change
the fume fan speed and the screw feeder motor.
Press the button for a few seconds and scroll down the
parameters in the display using the same button until it displays
the term "PELL" and confi rm with the
With the and buttons, you can make the settings
as follows:
PARAMETER
0
1
2
- 1
- 2
Confi rm with the button.
-
.button.
FLAME
DEFAULT
+ +
+
-
- -