Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GETTING STARTED
When you use the Kidizoom
Cam HD camera for the first time, switch
the Master Power Switch to On. Locate
the Master Power Switch on the bottom
of the camera and move it to the 1
position
When the Master Power Switch is Off, it
will not be possible to charge the camera
or play any activities.
BATTERY CHARGING
Note: Adult operation required.
•
Make sure the Master Power Switch is turned On before charging.
•
Pull up the rubber cover over the Micro-USB Port on the side of
camera.
•
Insert the micro-USB cable (small end) into the Micro-USB Port on
the camera.
•
Insert the large end of the micro-USB cable into a USB port
on a computer or wall plug. A USB port is usually marked with
this symbol:
•
Once the connection is successful, you will see the battery
charging screen.
•
When the battery is fully charged, a message will appear on the
screen briefly, then the screen will turn off. Disconnect the camera
from the power source.
Note: It will take approximately three hours to fully charge the battery.
The actual charging time depends on the charging current, the remaining
charge and the ambient temperature of the charging environment. The
optimal ambient temperature is 32°F to 104°F (0°C to 40°C).
5202 CAN IM 修改中.indd 9
.
Action
®
9
9
9
05/11/2019 14:42:02
Publicité
Table des Matières
