VTech Kidizoom Action Cam HD Manuel D'utilisation page 28

To Attach the Floating Handle
1. To mount the waterproof
2. Loosen the angle adjustment handle and you can rotate the angle
3. Tighten the angle adjustment handle after you set the capture angle.
Notes on Use
•
•
•
•
•
•
•
•
•
•
•
28
8 2
8 2
5202 CAN IM 修改中.indd 28
case onto the Floating
Handle, align the tripod
screw hole on
waterproof case to the
screw of the Floating
Handle. Screw the knob
on the floating mount
clockwise to affix
camera on the mount.
adjustment arm to adjust the capture angle.
This waterproof case is operable up to a water depth of 6' (2 meters)
for 30 minutes with the camera inserted.
The waterproof performance is in accordance with the current toy
safety standards.
Do not subject this unit to a jet of pressurized water.
Do not use this unit in hot springs.
Use this unit in the recommended operation water temperature range
of 32°F to 104°F (0°C to 40°C). Otherwise, moisture, condensation or
water leakage may occur and damage the camera.
Sometimes waterproof performance is lost if this unit is subject to a
strong impact such as from being dropped.
Do not throw this unit into the water.
Do not leave this unit under direct sunlight or in a very hot and
humid place for a long period of time. If you cannot avoid leaving
this unit under direct sunlight, be sure to cover it with a towel or other
protection.
When the camera overheats, it may automatically turn off or recording
may malfunction. To use the camera again, leave it in a cool place
until it returns to room temperature.
Thoroughly wash off any sunscreen that may get on the waterproof
case with warm water.
After using in salt water, clean the waterproof case in fresh, warm
water.
the
the
05/11/2019 14:42:07