VTech Kidizoom Action Cam HD Manuel D'utilisation page 34

5. We recommend that the adhesive flat mount stay on the
6. Mount the holder / waterproof case onto the adhesive mount. Align
7. Loosen the angle adjustment handle and you can rotate the angle
8. Tighten the angle adjustment handle after you set the capture angle.
Note:
Once the adhesive surface is affixed to a device, do not tear it off or
the adhesive performance may be reduced and it may not work well in
subsequent use.
The mounting attachment can be detached from the adhesive mount.
Push the detachable buckle as shown in the illustration to separate the
two parts.
34
4 3
4 3
5202 CAN IM 修改中.indd 34
Note: Maintain this pressure for several minutes to improve the
adhesive bond strength.
surface at room temperature for one day before using to allow
the ultimate strength to be achieved. At room temperature,
approximately 50% of the ultimate strength will be achieved
after 20 minutes, 90% after 24 hours and 100% after 72 hours.
the tripod screw hole on the camera holder / waterproof case to the
screw of the adhesive mount. Screw the knob on the adhesive mount
clockwise to affix the camera to the mount.
adjustment arm to adjust the capture angle.
05/11/2019 14:42:10