Ryobi RST36X5140 Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Secure long hair so it is above shoulder
level to prevent entanglement in moving
parts.
Ensure before each use that all controls
and safety devices function correctly. Do
not use the product if the "off" switch does
not stop the product.
Before each use, always visually inspect
to see, that the housing is undamaged and
that guards and handles are in place and
properly secured.
BATTERY TOOLS USE AND CARE
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries
may
behaviour resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire
or temperature above 130°C may cause
explosion.
Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
2
| English
exhibit
unpredictable
SNOW THROWER SAFETY RULES
Do not put hands or feet near or under
rotating parts. Keep clear of the discharge
opening at all times. Do not put any objects
into openings.
Exercise extreme caution when operating
on or crossing gravel drives or walks. Stay
alert for hidden hazards or operating near
public roads.
To reduce the risk of injury associated
with contacting rotating parts, always stop
the product and remove the battery pack.
Make sure all moving parts have come to a
complete stop:
after striking a foreign object to inspect
the product for damage
if the product starts to vibrate abnormally
and check immediately for the cause.
Vibration is generally a warning of
trouble.
before cleaning or clearing a blockage
before leaving the product unattended
before
checking,
maintenance, or working on the product
Do not clear snow across the face of slopes.
Exercise extreme caution when changing
direction on slopes. Do not attempt to clear
steep slopes.
Never operate the product without proper
guards, plates, or other safety protective
devices in place.
Never direct the discharge toward people
or areas where property damage can
occur. Keep children and others away.
Do not overload the product capacity by
attempting to clear snow at too fast a rate.
Never operate the product at high transport
speeds on slippery surfaces. Look behind
and use care when operting in reverse.
Disengage power to the collector/impeller
when the product is transported or not in
use.
Use
only
original
replacement
parts,
attachments.
Never operate the product without good
visibility or light. Always be sure of your
footing, and keep a firm hold on the
handles. Walk; never run.
conducting
manufacturer's
accessories,
and

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rst36b51

Table des Matières