Impact Driver Safety Warnings; Environmental Protection; Intended Use - Ryobi RID1801 Traduction Des Instructions Originales

WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.

IMPACT DRIVER SAFETY WARNINGS

■ Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
■ Make sure that the tool is only connected to the
voltage marked on the name plate.
■ Never use the tool if its cover or any bolts are
missing. If the cover or bolts have been removed,
replace them prior to use. Maintain all parts in good
working order.
■ Always secure tools when working in elevated
positions.
■ Never touch the blade, drill bit, grinding wheel or
other moving parts during use.
■ Never start a tool when its rotating component is in
contact with the work piece.
■ Never lay a tool down before its moving parts have
come to a complete stop.
■ The use of accessories or attachments other than
those recommended in this manual might present
a hazard.
■ When servicing use only identical replacement
parts.
■ Wear ear protectors. Exposure to noise can cause
hearing loss.

INTENDED USE

You may use this product for fastening / removing screws
and bolts.
CAUTION
The impact driver is not designed to be used as a drill.
MAINTENANCE
■ When servicing, use only identical Ryobi replacement
parts. Use of any other parts may create a hazard or
cause product damage.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
■ Always wear safety goggles or safety glasses with side
shields during power product operation or when blowing
dust. If operation is dusty, also wear a dust mask.
■ To avoid serious personal injury, always remove
the battery pack from the product when cleaning or
performing any maintenance.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging
environmental-friendly recycling.
SYMBOLS
Safety alert
CE conformity
EurAsian Conformity Mark
Please read the instructions carefully
before starting the machine.
Wear ear protection
Wear eye protection
Recycle
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check
with your Local Authority or retailer for
recycling advice.
English
should be sorted for
1
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR