Impact Point Correction By Elevation Adjustment; Settings And Selecting The Ballistic Output Formats - Leica RANGEMASTER 2000-B Notice D'utilisation

IMPACT POINT CORRECTION USING ELEVATION
ADJUSTMENT
(Click/MoA adjustment)
Variations in the point of impact can be compensated by
adjusting the reticle on your telescopic sight accordingly.
Based on the bullet trajectory and the zeroing range (see
p. 35), the Leica Rangemaster 2000-B can show you the
required adjustment, i.e. the relevant number of clicks.
For different elevations, you can specify whether the click
levels will be
- based on the international standard MOA (minutes of
angle) graduation, or
- displayed in 5 or 10 millimeter increments.

Settings and selecting the ballistic output formats

Start with step 1 if you have not previously opened the menu
control, or with step 3 if you have just specified the zeroing
range and is still flashing in the display.
ABC
1. Press and hold the secondary button (1) (≥3s).
• The display shows
2. Press the secondary button briefly (<2s) three times.
• The display changes to
3. Press the main button (2) several times to select the
required ballistic setting.
- or
EHr
- , or
HOLd
- (1MOA), Display in decimal
1-1
- ( / MOA), or
1-3 1
3
- ( / MOA), or
1
1-4
4
- mm or
10
- mm.
5
4. Save your setting by briefly pressing the secondary button.
• The saved setting is lit continuously for 4s as confirma-
tion and then disappears.
38
.
USEU
, then to , and then to
bAll SId
.
AbC