Range Measurement - Leica RANGEMASTER 2000-B Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48

RANGE MEASUREMENT

To measure the distance to an object, you must aim directly
at it. To do this, proceed as follows:
1. Press the main button (2). This switches on the device.
• The reticule appears.
When you release the main button, the reticule remains lit for
around another 6 seconds. If you hold it down, the reticule
remains lit continuously.
2. Aim at the object while the reticule is lit.
3. Press the main button again.
• a. The reticule disappears briefly during the measure-
b. The measured value is displayed.
As long as the reticule remains lit, you can carry out another
98
measurement at any time by pressing the main button.
The display shows:
- the distance to the object is less than 10 meters/yards, or
- the range is exceeded, or
- the object is not sufficiently reflective.
When the display disappears, the Leica Rangemaster 2000-B
shuts down automatically.
30
ment.
-, if
- -

Publicité

Table des Matières
loading

Table des Matières