VOLTCRAFT 23 87 82 Notice D'emploi page 36

• Avoid operation in direct proximity of strong magnetic or electromagnetic
fields, transmitter aerials or HF generators. This can affect the control
electronics.
• Never operate the device immediately after it was taken from a cold room to
a warm room. The resulting condensation may lead to malfunctions or
damage! Allow the 7 in 1 multimeter to reach room temperature before
switching it on.
• Do not expose the device to direct sunlight, high temperatures (>35 °C) or
extreme cold (<0 °C). Keep it away from dust and dirt.
• Servicing, adjustments and repairs must only be carried out by a specialist/
specialist workshop. The device contains no parts that require servicing or
adjusting by you.
• Handle the product with care - impact, blows or falls from even a low height
may damage the product.
• In schools, training centres, hobby and self-help workshops, the handling of
chargers and batteries must be supervised by responsible trained personnel.
• If you have reason to believe that the device can no longer be operated
safely, disconnect it immediately and make sure it is not unintentionally
operated.
It can be assumed that operation without danger is no longer possible if the
device has any visible damage, the device no longer works, after extended
storage under unsuitable conditions or after difficult transport conditions.
If you are not sure about the correct operation or if questions arise which are not covered
by the operating instructions, please do not hesitate to contact us or another specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Phone +49 180/586 582 7.
36