Date And Time Settings; Manually Setting The Date/Time - TechniSat TECHNIRADIO 6 IR Notice D'utilisation

14.3 Date and time settings

14.3.1 Manually setting the date/time

Depending on the setting for time updates (Section 14.3.2), the date and time might
have to be set manually.
> Open Menu > [System settings] > [Time and date].
> Press the SELECT knob.
> Select using the SELECT knob > [Time/date setting] and press the SELECT
knob.
> The first digits (day) of the date flash and can be changed using the SELECT
knob.
> Press the SELECT knob to accept the setting.
> The next digits (month) of the date then start to flash and can again be
changed as described above.
> Press the SELECT knob after every additional setting in order to go to the next
setting.
> Proceed with the time in the same way as described above.
146