Cycle And Option Descriptions - KitchenAid KUDD03DTSS Instructions D'utilisation

This information covers several different models. Your dishwasher may not have all of the cycles and options described.
CYCLE SELECTIONS
CYCLES DISH LOAD TYPES
Use for loads with normal
amounts of food soil.
Use for hard-to-clean, heavily
soiled pots, pans, casseroles,
and regular tableware.
Use for loads with normal
amounts of food soil.
Use for lightly soiled items or
china and crystal.
Use to quickly wash
prerinsed glasses or dish
loads.
Use for rinsing dishes,
glasses, and silverware that
will not be washed right away.
You can customize your cycle by selecting an option.
See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change
an option anytime before the selected option begins.
*Maximum wash times depend on water temperature, heavy soil condition, dish load size and options selected.
NOTE: Dry time (fan running) is typically 4 hours after wash cycle. After 30 minutes of dry time, the clean light will illuminate. Anytime after
the clean light is lit and the drawer is opened for longer than 30 seconds, the cycle will be terminated.
OPTION SELECTIONS
OPTIONS DISH LOAD TYPES
For best drying results, dry
dishes with heat.
To sanitize your dishes and
glassware in accordance
with NSF/ANSI Standard
184 for Residential
Dishwashers.
Loads containing tough,
baked-on food.

Cycle and Option Descriptions

DESCRIPTIONS
This cycle uses a sensor to adjust
amount of water, time and heat.
This cycle forces max time, water and
heat.
The energy-usage label is based on this
cycle.
This cycle washes at lower temperatures.
Towel drying may be required.
This cycle does not dry.
This cycle does not dry.
Do not use detergent.
DESCRIPTIONS
This option with the use of rinse aid will provide the best
drying performance.
Raises the water temperature in the final rinse to
approximately 155°F (68°C). This high temperature rinse
sanitizes your dishes and glassware in accordance with
NSF/ANSI Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for
licensed food establishments.
The Sanitize or Sani Rinse option adds heat and time to the
cycle.
Increases the target water temperature during the wash
portions of the cycle.
Adds heat, wash time and water to the cycle.
WASH TIME (HH:MM)
Cycle Cycle + Options
Minimum Minimum
1:15 1:30
1:30 1:30
1:05 1:30
1:00 1:00
0:30 none
0:10 none
USE WITH:
All cycles, except Rinse
Only. Automatic with all
wash cycles unless you
turn it off.
Normal cycle and
Sensor wash. Heavy
Duty cycle automatically
uses Sani Rinse. Only
these sanitization cycles
have been designed to
meet the NSF/ANSI
requirements.
Heavy Duty, Normal or
Sensor Wash
*Maximum
2:10
2:10
2:10
1:20
none
none
5