Hendi 281406 Mode D'emploi page 7

Activating the child lock
To activate the child lock, the microwave must be
in stand-by mode. Keep the 'PROG' button pressed
until "loc" appears on the display.
How often has the microwave been used?
This microwave has a function which allows you
to see how often it has been used. To activate this
function:
Cleaning and maintenance
• Always remove the plug from the socket before
cleaning the appliance.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
Trouble shooting
The following events can be considered as normal
effects of working with this microwave.
• Radio and TV reception may be interfered when
the microwave is operating.
Trouble
Microwave doesn't start working
Oven doesn't heat
Technical details
AC power supply: 230 - 240V / 50 Hz
Input power: 1500 W
Output power: 1000 W
Outside dimensions: 520x456x312 mm
To deactivate the child lock, the microwave must be
in stand-by mode. Keep the 'PROG' button pressed
until "loc" appears on the display.
1. Open the door.
2. Press the 'STOP/RESET' and 'POWER LEVEL'
buttons at the same time. The frequency of use
will appear on the display.
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary. Do not use
abrasive materials.
• The light of the oven might be dimmed when op-
erating.
• During heating steam can come from the food
and can accumulate on the cooler parts of the
microwave like for instance on the door.
Possible cause
Power cord not plugged in correctly.
Fuse blown of circuit breaker active.
Power outlet defective
Door not closed correctly
Inside dimensions: 335x364x212 mm
Capacity: 25 litres
Net weight: 17.7 kg
Solution
Check if the power cord is plugged
in correctly.
Replace fuse or reset circuit breaker.
If not sure how to do this contact
your supplier.
Test outlet with other appliance and
check circuit breaker.
Check the door if it closes properly,
if it can't be closed properly contact
your supplier.
EN
7