Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SAFETY INSTRUCTIONS
8.
Use safety accessories. Safety glasses and ear muffs should always
be worn
Do not overreach. Keep your footing secure and balanced at all times.
9.
Look after your tools. Keep tools clean and sharp for better and
10.
safer performance. Follow the instructions regarding lubrication and
accessory changes. Keep tools handles dry, clean and free from oil and
grease.
11.
Stay alert. Watch what you are doing. Use common sense. Do not
operate a power tool you are tired or under the influence of alcohol,
drugs or medication that cause drowsiness.
12.
Check for damaged parts. Before using a tool, check that there are no
damaged parts. If a part is slightly damaged, carefully determine it will
operate properly and perform its intended function. Check for alignment
of moving parts, binding of moving parts, breakage of parts, proper
mounting and any other conditions that may affect the operation of the
tool. A guard or other part that is damaged should be properly repaired
or replaced by an authorized service facility, unless otherwise indicated
in this manual. Defective switches must be replaced by an authorized
service facility. Do not use a tool if the switch does not turn the tool ON
and OFF correctly.
13.
Be careful of the cords or cables hidden in the shrubs.
Guard against electric shock. Prevent body contact with grounded
14.
objects such as water pipes.
15.
Always replace damaged parts with approved identical parts. Use an
authorized service facility to install replacement parts.
16.
Do not let the tool run unattended. Always wait until the tool has come
to a complete stop before leaving it.
WARNING: Unplug tool from power source before attempting to attach
the guard. Never operate the tool without guard firmly in place. The guard
must always be on the tool to protect the user.
Electrical safety
A.
For all double-insulated appliances
1)
Replacement Parts
When servicing use only identical replacement parts.
2) Polarized Appliance Connections
To reduce the risk of electric shock, this appliance has a polarized
plug (one blade is wider than the other) and will require the use of a
polarized extension cord. The appliance plug will fit into a polarized
extension cord only one way. If the plug does not fit fully into the
extension cord, reverse the plug. If the plug still does not fit, obtain
a correct polarized extension cord. A polarized extension cord will
require the use of a polarized wall outlet. This plug will fit into the
polarized wall outlet only one way. If the plug does not fit fully into
the wall outlet, reverse the plug. If the plug still does not fit, contact
a qualified electrician to install the proper wall outlet.
4
Publicité
Table des Matières
