Ceiling Fan Assembly - Emerson LUCERE CF575BQ00 Manuel Du Propriétaire

3.1
NOTE: Take care not to scratch the Fan Housing
Assembly when installing the Blades.
Slide the Blade into the Fan Housing Assembly Blade
Slot (Figure 1).
Align the Three Blade Holes with the Three Fan
Housing Assembly Screw Holes.
Secure the Blade using the Three #8-32 x 11mm
Washer Head Blade Screws (supplied) (Figure 1).
Repeat for the remaining Four Blades.
A spare #8-32 x 11mm Washer Head Blade Screw is
supplied in the parts bag, if needed.
WARNING
!
To reduce the risk of personal injury, do not bend
the blades when installing, balancing the blades or
cleaning the fan. Do not insert foreign objects in
between rotating blades.
3.2
Remove and Retain One of the Three #6-32 x 3/8"
Truss Head Screw with Lockwasher from the Motor
Assembly Hub (Figure 2).
Loosen the remaining Two #6-32 x 3/8" Truss Head
Screws with Lockwashers (Figure 2).

3. Ceiling Fan Assembly

BLADES (5)
Figure 1
MOTOR
ASSEMBLY HUB
Figure 2
5
INSTALL AND TIGHTEN
#8-32 x 11mm WASHER HEAD
BLADE SCREWS (3 per blade)
REMOVE AND RETAIN ONE
#6-32 x 3/8" TRUSS HEAD
SCREW WITH LOCKWASHER
LOOSEN TWO #6-32 x 3/8"
TRUSS HEAD SCREWS
WITH LOCKWASHERS
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF575