Emerson LUCERE CF575BQ00 Manuel Du Propriétaire page 6

3. Ceiling Fan Assembly
3.3
Place the 2-pin Motor Assembly Wires and Connector
through the Lower Housing Assembly Center Hole.
Position the Lower Housing Assembly Key Hole Slots
onto the Two Loosened Screw Heads.
Rotate the Lower Housing Assembly Clockwise to
engage the Two Screws.
NOTE: Verify that the washers are not trapped
between the Lower Housing Assembly and the
Motor Assembly Hub.
Reinstall and Tighten the previously removed
#6-32 x 3/8" Truss Head Screw with Lockwasher
(Figure 3).
Retighten all Three #6-32 x 3/8" Truss Head Screws
with Lockwashers to securely attach the Lower
Housing Assembly to the Motor Assembly Hub
(Figure 3).
A spare #6-32 x 3/8" Truss Head Screw with
Lockwasher is supplied in the parts bag, if needed.
3.4
Engage the Fan Motor 2-Pin Wire Connector into the
2-pin Wire Connector of the LED Light Fixture Assembly
(Figure 4).
The connection is complete when you hear a soft click.
(Continued)
LOWER HOUSING
ASSEMBLY
RETIGHTEN TWO #6-32 x 3/8"
TRUSS HEAD SCREWS WITH
LOCKWASHERS
Figure 3
Figure 4
6
REINSTALL AND TIGHTEN ONE
#6-32 x 3/8" TRUSS HEAD
SCREW WITH LOCKWASHER
FAN MOTOR
CONNECTOR
LED LIGHT
CONNECTOR
LED LIGHT FIXTURE
ASSEMBLY CONNECTOR
FAN MOTOR
CONNECTOR
ETL Model No.: CF575