Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Configuration Settings in the EIM
1.
In the menu tree on the left side of the screen, select
the Network Settings folder.
2.
In the Network Settings screen, define the following
items:
IP Address
●
●
Netmask
●
●
Gateway IP Address
●
●
IP Configuration – make certain this is set to Static
●
●
3.
Select the Submit button.
4.
In the Network Settings OK screen, select the Home
button.
5.
In the menu tree on the left side of the screen, expand
the Serial Settings folder.
Ethernet Interface Module
Configuration Settings in the EIM
6.
Select the Port 1 folder within the Serial Settings folder.
7 .
In the Serial Settings screen, set the following
parameters:
Baud rate: 9600
●
●
Data bits: 8
●
●
Stop bits: 1
●
●
Parity: Even
●
●
Flow Control: None
●
●
FIFO: Enable
●
●
8.
Select the Submit button.
9.
In the Serial Settings OK screen, select the Home
button.
3
Publicité
Table des Matières
