auna NR-620 DAB Mode D'emploi page 39

4. Press the " Record " button second time and the display will show "REC
ALL".
5. Press the " Record " button third time and the unit will start recording
of all tracks of the CD.
6. The unit will stop record automatically after completion. And the unit
will display the total track no. after recording.
Remarks:
- The recording speed is 1:1 and according to the actual plying time of the
Phono or Tape
- During CD recording, the recording process is on 1:1 scale and the unit
will playback the song(s) during recording.
- During MP3 disc recording, it's a copy mode meaning the system will
copy the MP3 file only and will not playback the songs.
- The recording format is preset at – MP3 bit rate : 128 kbps, sampling
rate : 44.1khz
- No song title will be recorded during encoding mode
- To interrupt the recording, press the " Stop " button again during record
mode.
- Encoding CD or MP3 file to USB will be successful only entire song
being encoded or copied, if terminate the encoding or copying process
intermediately, there is no track being recorded nor stored to the USB
B) Phono/Cassette encoding
1. Plug in the USB pen drive for recording (make sure it has enough empty
space).
2. Follow "Listing to tape" or "Phono" section to insert the tape or place
the record that you want to encode/record.
3. Press the " Record " button (7) three times until the LCD display
flashing with "REC USB" meaning the system has started the encoding.
4. Start playback at Tape or Phono for the track which you want to record
to USB.
5. After finish of recoding, press the " Stop " button (12) once to terminate
the recording and the LCD display will return to "Tape" or "Phono"
mode.
C) DAB/FM encoding
1. Plug in the USB pen drive for recording (make sure it has enough empty
space).
2. During DAB or FM playback mode, press the " Record " button (7)
two times until the LCD display flashing with "REC USB" meaning the
system has started the encoding.
EN
39