Dab Radio - auna NR-620 DAB Mode D'emploi

EN
30

DAB RADIO

DAB radio - Auto scan
1. Switch the function to DAB mode.
2. The player will scan the DAB station automatically till receive the DAB
station.
3. Press the "scan" button again to auto-search to the next available DAB
station forward, or press and hold the "scan" button for 2-3 seconds to
auto-search the station backward.
4. Adjust the volume knob (9) to the desire volume level.
DAB radio - Manual tuning
1. Turn the "Select/Enter" knob (3) to tune to the desired station
manually.
2. Adjust the volume knob (9) to the desire volume level.
Radio data system (RDS)
• This is the features to display the information which released from the
radio broadcast and will showed on LCD display step by step as below
by pressing the Info button (11) continuously.
• Radio text → program type → reception → time / date → frequency→
Auto / mono.
• Hints for best reception:-
• DAB/FM : The receiver has an external DAB/FM antenna. Connect it to
the DAB/FM antenna socket (22) and extend it for the best reception.
Preset stations (by remote control)
You can store up to total of 20 radio stations in the memory (10-FM/10-DAB).
1. Set to FM/DAB mode
2. Turn to the desired radio station by " manual " or " auto " tuning
method.
3. Press and hold the Preset button (12) around two seconds to enable
memory state, " Empty P1" will show on the display.
4. Press the Tuner/Menu + or - button on the remote control to select the
desired station memory for storage.
5. Press the Preset button (12) to confirm the preset memory.
6. Repeat step 2 to 5 to store other stations.