Cd Player - auna NR-620 DAB Mode D'emploi

Recall preset stations
1. Press the Preset button (12) once to enable recall state.
2. Press Tuner/Menu + or - button on the remote control to select the
desired memory station.
3. Press Preset button (12) to confirm the recall the memory station.
• The pre-set memories will be cancelled completely if dis-connecting
the main power supply and back up battery did not installed. You are
recommended to switch the system into standby mode for convenience
usage.
• There are 3 seconds for program state, after 10 sec. This state would
resume to normal tuner mode automatically.
• You can overwrite a present station by storing another frequency in its
place.
Language Setting
• During DAB playing mode, press "Menu" button (14) and then turn the
"Select/Enter" knob (3) to choose 'Language' and press "Select/Enter"
knob to confirm enter into "LANGUAGE" setting. You can choose from
"English – Deutsch" and press the "Select/Enter" knob to confirm.

CD PLAYER

Playing compact disc
Getting start
1. Turn on the unit by pressing the Power/function button (13).
2. Switch the function to "CD mode" by pressing the Power/function
button repeatedly.
3. Press "Open/Close" button (6) to open the CD door.
4. Place a CD with the printed side facing up inside the tray & then close
the CD door.
5. Focus search is performing, the LCD display will show the number of
track & playing time and start playback automatically.
Play / pause / stop mode
• During playback of the disc and press the Play/Pause (14) button once,
the playing time will be freeze & flashing on the LCD display. Press
again to resume normal playback.
• If press Stop button (12) once, the system will go to stop mode.
EN
31