Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to
help hold the gas orifice spud in the nut driver while changing
it. Insert nut driver into the gas opening, and press down onto
the gas orifice spud, then remove by turning the propane gas
orifice spud counterclockwise and lifting out. Set propane gas
orifice spud aside.
A
A. Propane gas orifice spud
9. Natural gas orifice spuds are stamped with a letter and a
number. Install the Number 154 oven bake burner orifice
spud.
10. Place Propane gas orifice in plastic parts bag for future use,
and keep with package containing literature.
11. Push down on the clip on the electrode bracket.
B
A
A. Oven bake burner electrode bracket
B. Electrode bracket clip
12. Replace oven bake burner electrode inside bracket.
B
A
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
13. Reinstall the oven bake burner and oven bake burner screws.
See Step 5 for illustration.
Replace Oven Bake Burner Cover
1. Align rear shoulder screw mounting holes (keyholes) on the
oven bake burner cover with shoulder screws in the bottom of
the oven.
A. Shoulder screw mounting holes (keyholes)
B. Shoulder screws
2. Drop cover and slide to left or right to slide shoulder screws
into narrow ends of keyholes, and lock into place.
A
A. Bake burner cover
A
B
29
Publicité
Table des Matières
