Charging - Panasonic WX-SZ200P Manuel D'installation Et D'utilisation

Charging

1
Turn OFF the microphone
Check that the [PWR] indicator on the microphone is off.
WX-ST200P
2
Insert the microphone into the charger
Check that the [POWER] indicator in the charger
lights on, and place the microphone as shown in
the illustration to the right. When the microphone is
inserted into the charger, the [CHG] indicator of the
former will show the charging status as follows:
On: Charging
Off: Charging complete or the microphone is not
set correctly on the charger.
Blinking:
Usually caused by one of the following.
The microphone may contain a dry-cell or
deteriorated rechargeable battery, or the
battery may be absent. Make sure that the
proper type of battery is inserted.
The rechargeable battery may be outside of
the operating temperature range. Make sure
that the battery is within the operating
temperature range.
16
WX-ST400P
Charge indicator
Charge indicator
Power indicator
Power switch
Power indicator
Power switch
Power
indicator