Panasonic WX-SZ200P Manuel D'installation Et D'utilisation page 14

Installation
Power specifications
⚫ The charger uses AC 120 V (60 Hz) power. Connect the charger to an enough capacity
power source.
Power
⚫ The product does not have a power switch. Connect the power cord through a power
breaking device in one of the following ways in order to be able to easily switch it off.
Install the product near the electric outlet or breaker, and connect by the power plug.
Connect the product to a breaker panel with at least 3.0 mm (1/8 inches) of space
between contacts. Use a breaker which can cut off power from all poles except the
protective ground connection.
AC adaptor and power cord
⚫ The included AC adaptor and power cord can only be used for this product. Do not use
them on other products. Do not use AC adaptors or power cords from other products on
this charger.
⚫ Place the AC adaptor horizontally on a flat surface.
14