Cleaning & Maintenance; General Info - Jackson Grills LUX Serie Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CAUTION:
Keep the grill area clear and free from combustible materials, gasoline and other flammable vapors and
liquids
Do not obstruct the flow of combustion and ventilation air.
Keep the ventilation openings of the cylinder enclosure free and clear of debris.
Ensure that the grill is completely cold before performing any cleaning and maintenance.
Burning off deposits and soiling by turning the main burners on high for about 5 minutes after each use will
keep excessive food residue from building up, but this DOES NOT replace proper cleaning and
maintenance.

1. GENERAL INFO:

This grill is made of stainless steel. There are many different stainless steel cleaners available. Always use
the mildest cleaning method first, scrubbing in the direction of the grain. For the most stubborn stains, ask
your dealer about Jackson Grills Cleaner and Polish (sku: 101CN)
To touch up noticeable scratches in the stainless steel, sand very lightly with very fine emery cloth or 800
grit sandpaper, in the direction of the grain. Specks of grease can gather on the surfaces of the stainless
steel and bake onto the surface, giving the appearance of rust.
Use a cleaning pad (such as ScotchBrite) along with a stainless steel cleaner to remove these stains. (Rub
in the direction of the stainless grain.) Final finish with a stainless steel polish, using a soft, dry cloth.
2. GREASE MANAGEMENT SYSTEM:
Your grill is equipped with a small grease cup in the back of the unit. This cup should be emptied & cleaned
thoroughly after each use and before the grill is transported.
Your grill is designed to allow grease to flow along the bottom of the firebox, thereby collecting in both the
grease pan and the small grease cup. (Fig. 15 & 16) Note: small grease cup is only located on cart models.
It is highly recommended to clean the pan and cup after every use to avoid the possibility of a grease fire
A small amount of sand can be added to the grease pan and cup, to absorb accumulated grease.
Figure 15
Cleaning and Maintenance:
Clean your grease pan & grease
cup regularly. Failure to do so
may cause a grease fire, resulting
in injury or property damage!
19
!WARNING!
Figure 16

Publicité

Chapitres

Table des Matières

Dépannage

loading

Table des Matières