Replacement Parts; Troubleshooting - Panasonic ES‑ST25 Mode D'emploi

►Replacementparts

Replacement parts are available at your dealer or Service Center.
System outer foil and inner
blades
Replacement parts for
ES‑ST25 System outer foil
Inner blades

Troubleshooting

Problem
Trimmed hairs fly all over.
System outer foil gets hot.
The shaver cannot be
properly cleaned even
after water is poured from
the water inlet.
The blades do not dry.
The odor is getting
stronger.
WES9013
WES9087
WES9068
Action
This can be improved by cleaning
every time after shaving.
Clean the inner blades.
Confirm that the cleaning shutter
is firmly closed.
Replace the system outer foil if it
is damaged or deformed.
(See page 12.)
Remove beard trimmings.
When the shaver is very dirty,
remove the foil frame and wash
with water.
(See page 12.)
The blades may not dry quickly
due to temperature conditions.
The blades can be dried more
easily by removing for drying.
This can be improved by cleaning
every time after shaving.
Problem
You do not get as close a
shave as before.
The shaving sensor does
not respond.
The shaving sensor
responds even though the
shaver is not in contact
with the skin.
Action
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Depending on the beard thickness,
the shaving sensor may not react
and the driving sound may not
change. This is not abnormal.
The shaving sensor may not
respond depending on the
thickness of the beard or the type of
the shaving gel, but this is normal.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 12.)
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
13