UsingTheShaver - Panasonic ES‑ST25 Mode D'emploi

After charging is
While charging
completed
The charge status The charge status
lamp ( ) glows lamp (
red.
• After charging is completed, turning the power switch ON with
the shaver plugged in will cause charge status lamp to light up
and then turn off after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is 10 – 35 °C
(50 – 95 °F). It may take longer to charge or the battery may fail
to charge properly in extremely high or low temperatures.
The charge status lamp ( ) will blink twice every second when
there is a problem with charging.
Charge the shaver within the recommended ambient temperature
range.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp (
may not glow. It will eventually glow if kept connected.
4
4
Disconnecttheadaptorafterchargingis
completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
10
Abnormal
charging
The charge status
lamp ( ) will blink
) turns
twice every
off.
second.

Usingtheshaver

1
1
Pressthepowerswitchtoselectthedesired
shavingmode.
• Each time you press the power switch, the shaving mode
changes from "Shaving sensor mode"
"OFF."
Shavingsensor
mode
Beard thickness is
automatically
sensed and the
power is
automatically
adjusted when
shaving.
)
The shaving sensor
lamp ( ) glows
blue.
• The shaving sensor may not respond depending on the
thickness of the beard or the type of the shaving gel, but
this is normal.
"Normal mode"
Normalmode OFF
The power level is
constantly
—
maintained while
shaving.
The shaving sensor The shaving sensor
lamp ( ) turns off. lamp ( ) turns off.