Safety Instructions; Machine Information - Ferm SSM1007 Traduction De La Notice Originale

SCROLL SAW
SSM1007
Thank you for buying this Ferm product. By doing
so you now have an excellent product, delivered
by one of Europe's leading suppliers. All products
delivered to you by Ferm are manu factured
according to the highest standards of performance
and safety. As part of our philosophy we also
provide an excellent customer service, backed
by our comprehensive warranty. We hope you will
enjoy using this product for many years to come.

1. SAFETY INSTRUCTIONS

Explanation of the symbols
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per
the instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Denotes risk of personal injury, loss of
life or damage to the tool in case of non
observance of the instructions in this
manual.
Denotes risk of electric shock.
Wear ear and eye protection.
Specific safety instructions
• Wear safety goggles and a dust mask.
• This scroll saw machine is for indoor use only.
• Ensure that the teeth of the saw point
downwards prior to using the machine.
• If teeth of the saw blade are missing or are
damaged, then the saw blade must be
replaced immediately.
• Use the scroll saw machine on a stable and flat
surface.
• Never exert pressure on the sides of the saw
blade because it may break.
• Check wooden work pieces for possible
protruding nails etc. and remove these.
• Do not touch the sawing surface with your hands.
• Never leave the sawing machine unattended
while it is running.
• Do not remove any wood debris etc, in the
vicinity of the saw with your hands while it is
running. Turn the machine off before removing
the wood debris.
Immediately switch off the machine when
• Interruption in the mains plug, mains lead or
mains lead damage.
• Defect switch.
• Smoke or stench of scorched isolation.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply corre­
sponds to the voltage on the rating plate.
Mains connection
Only use earthed sockets with earthing wire
connected per the regulations.
Using extension cables
Only use an approved extension cable, corre­
spon ding to the machine power use. The wires
must have a minimum cross section of 1.5 mm2. If
the cable is on a reel, it must be fully laid out.

2. MACHINE INFORMATION

Intended use
This scroll saw is great for making toys, puzzles,
games, fretwork and jewelry. Because of its
cutting capacity it is a handy do­it­yourself tool.
It cuts wood up to 50 mm thick as well as plastics
and non­ferrous metals.
Technical specifications
Voltage
Frequency
Power input
230 V ~
50 Hz
120 W
5