Description; Operation - Dustcontrol DC 5800c 9.2 kW P Notice Originale

Description

Th e DC 5800c 9.2 kW P is machine with large suction
capacity and robust construction while still being compact
and easy to maneuver. Filter cleaning is done with reverse
pulse which gives excellent fi lter economy. Th e turbopump
is equipped with a vacuum relief valve to give cooling air
to the pump.

Operation

Connect the machine to a suitable power source according to
the specifi cation plate on the machine. If the electrical cord
on the machine becomes damaged it should be replaced.
Th e fi lter should be cleaned 1-2 times per day with conti-
nuous running or if the machine is equipped with a fi lter
monitor, when this is in the red area.
For fi lter cleaning:
1. Start the machine.
2. Close the shutter valve on the machines inlet.
3. With slow, even motion open the pulse top by lifting
the handle. Repeat three to six times.
4. Open the shutter valve.
5. If the fi lter condition meter reads green work can con-
The machine is used primarily in semi-mobile system
applications. It can be placed outside for connection to
temporary pipe or hose systems with 110 mm mains and
76 mm branches. It is advisible to use a preseparator of
appropriate capacity.
tinue, if in the red, pulse clean again. If after several
repetitions, the fi lter condition still shows red the fi ne
fi lter must be changed.
Th e plastic sack should be changed only after the fi lter has
been cleaned. Th e sack should be changed when the dust
level is about 5 cm under the foot valve. Th e plastic sack
should be sealed after removal from the machine.
Use only original plastic sacks.
DC 5800c 9,2 kW P - 9 Part No 9092