Description; Operation - Dustcontrol DC 2900a/c/Auto/eco Notice Originale

Description

Th e machine should be used for suction and separation of
dried dust. Th e machine fulfi l the demands for separation
of unhealthy dust.
Th e DC 2900a/c/Auto is, despite it's compact size, a full
capacity Dustcontrol machine. It is stable, tough and
reliable and particularly suited to spot extraction in many
diff erent applications ie: welding, grinding, sanding and
cleanup with the 38 mm program. Dust separation is
in any case as effi cient as with the larger Dustcontrol
machines.

Operation

Connect the unit to a suitable power source,
note requirements on the ID plate. If an
extension cord is to be used, only waterproof
cords are acceptable.
Auto: Connect the subject electric tool to
the electrical outlet on unit. Set the selector
switch to the AUTO position. Th e unit will
start automatically when the subject tool is
started. Th e machine turns off a few seconds
after the connected tool is closed.
Man: For manual start of the unit, set the
selector switch to the MAN position.
Th e DC 2900a/c/Auto is equipped with a
fi lter indication lamp that indicates when the fi lter needs
cleaning or changing. Th e fi lter is generally cleaned once
or twice daily during normal continuous operation. Th e
unit must be in operation to perform fi lter cleaning. Loo-
se the tube from the suction pipe and press the plastic
cage against the black stop head on the exhaust channel
so that maximum pressure is created in the cyclone.
Open the port on the side of the unit three to six times. Th is
reverse pulse of air cleans the fi lter.
Th e design is ergonomic and appealing. With a very low
sound level of 70 dB(A) at 1 m distance, the
DC 2900a/c/Auto is suitable for use in areas which are
sen-sitive to noise. Th e direct drive two stage high pres-
sure fan is integrated into the units top. Th e 1200 /1400
W capacity fan is double insulated for higher safety.
DC 2900c
Th e plastic sack should be changed only after fi lter clean-
ing is done and when the collected material level is about
5 cm under the foot valve.
Use only original Dustcontrol spare parts.
DC 2900a
Th e container under the cyclone should be emptied when
it is fi lled to ca 2/3.
DC 2900a/c/Auto, 13 Part No 94164