Preparation For Use - NSK Ti-Max S970 Manuel D'utilisation

• Do not wipe nor immerse the handpiece or tips in acidic water or acidic solutions.
• Refer to Operation Manual of coupling.
• Perform periodical maintenance checks.
• If the handpiece has not been used for a long period, check for noise, vibration, and overheating before use.
1. Specification
Model S970L/S970KL/S970SL
Supply Air
Max. Air Consumption (0.3MPa)
Water Consumption
Vibration (Air Pressure Adjuster Ring Level 3)
Supply Water Pressure
Optic Glass Rod
Use Environment Temperature: 10 -40°C
Storage and Translation Temperature: -10 -50°C
2
S970 S970KL
S970SL
0.3MPa (3.1kgf/cm 2 )
35±5NL/min
KaVo ®
Voigt GmbH & Co., Germany.
20mL/min
Sirona
Germany.
5,800 - 6,200Hz
0.05MPa (0.5kgf/cm 2 ) - 0.20MPa (2.0kgf/cm 2 )
Non-Optic
Humidity: 30 - 75%RH Atomospheric Pressure: 700 - 1,060hPa
Humidity: 5 - 85%RH Atomospheric Pressure: 500 - 1,060hPa

2. Preparation for use

2-1 Connecting/Removing the handpiece
2-1-1 Connecting
Refer to Operation Manual which you will connect to.
S970L/S970
Insert the handpiece into Coupling until it clicks. (Fig. 1)
(KaVo ® MULTIflex ® LUX Coupling)
(Sirona ® Quick Coupling)
CAUTION
and MULTIflex ® are registered trademarks of Kaltenbach &
• Before use always check that the Coupling and Hose/Handpiece and Coupling are correctly seated and locked in place.
® is a registered trademark of Sirona Dental Systems GmbH,
• If the instrument is activated without the handpiece completely seated, the handpiece may fly out.
2-1-1 Disconnecting
Refer to the Operation Manual that you will connect to.
S970L/S970
Pull back the Connector Ring and remove the handpiece from the Coupling. (Fig. 1)
CAUTION
Do not operate Connector Ring during the supplying the air pressure. Handpiece may jump out from the coupling because of the pressure. (S970L/S970)
Connector Ring
Handpiece Coupling
Fig. 1
3