Canceling A Job; Using The Stop Key - Canon imageRUNNER 2422 Guide De L'utilisateur

Canceling a Job

There are several ways to cancel a job. This section describes how to cancel a job
using the Stop key and using the System Monitor screen.
NOTE
Several copies/prints may be output even after you canceled a job.

Using the Stop Key

You can cancel a copy, print, or remote scan job using the Stop key.
1
Press
● If
the machine is handling only one
❑
Proceed to step 4.
● If the machine has multiple
❑
Proceed to step 2.
2
Status
Copy
Printer
Report
Copy
NOTE
•
The current job is listed first on the Status screen.
•
The LCD display can display characters in ASCII code. Using other character codes may
cause characters garbled on the LCD display.
•
The messages displayed on the Status screen are as follows:
- <Printing> = Current job
- <Paused> = Current job that has been temporarily stopped by pressing
- <Waiting> = Reserved jobs
(Stop).
copy or print jobs
Paused
Waiting
Waiting
Waiting
:
job
:
Use [ ] or [ ] to select the job
you want to cancel ➞ press [OK].

Canceling a Job

2
(Stop).
2-21