Power Supply; Machine Location; Servicing / Maintenance; Machine Installation - Philips Saeco Armonia RI9330 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30

Power Supply

Only connect the coffee machine to a suitable socket.
The voltage must correspond to the indication on the
machine's label.
Power Cord
Never use the coffee machine if the power cord is
defective. If damaged, the power cable must be replaced
by the manufacturer or its customer service department.
Do not pass the cable around corners, over sharp edges
or over hot objects and keep it away from oil.
Do not use the power cord to carry or pull the coffee
machine. Do not pull out the plug by the power cord or
touch it with wet hands.
Do not let the power cord hang freely from tables or
shelves.
Personal Safety Guidelines
Make sure that the coffee machine is out of children's
reach.
Children are not aware of the risks linked with electrical
appliances. Do not leave the coffee machine packaging
within the reach of children.
Danger of Burns
Never direct the jet of hot steam and/or hot water towards
yourself or others. Always use the handles or knobs
provided.
Do not remove the portafi lter during coffee brewing.
Hot water drips may spill out of the coffee brew unit
during the warming phase.

Machine Location

Place the coffee machine in a safe place, where no
danger of overturning or injury can be caused.
Hot water or steam may spill out: Danger of scalding!
Do not keep the machine at a temperature below 0°C/32°F.
Frost may damage the machine.
Do not use the coffee machine outdoors.
Do not place the machine on very hot surfaces and
close to open fl ames in order to prevent its housing from
melting or being damaged.
Cleaning the Machine
Before cleaning the machine, you must deselect all
buttons and remove the plug from the socket.
Wait for the machine to cool down.
Never immerse the machine in water!
It is strictly forbidden to tamper with the internal parts of
the machine.
Water left in the tank for several days should not be
consumed. Wash the tank and fi ll it with fresh drinking
water.
Suitable Location for Operation and Maintenance
To ensure the machine's best performance, we
recommend checking the following:
• Choose a level surface;
• Choose a location that is suffi ciently well-lit, clean and
near an easily reachable socket;
• 16 •
• Provide for a minimum distance from the sides of the
machine as shown in fi g. A.
Storing the Machine
In case of inactivity of the machine for an extended
period of time, switch it off and unplug it from the socket.
Store it in a dry place and out of the reach of children.
Keep it protected from dust and dirt.

Servicing / Maintenance

In case of failure, problems or a fault resulting from a
suspected fall of the machine, you should immediately
remove the plug from the socket. Never attempt to
operate a faulty machine. Servicing and repairs may
only be carried out by authorized service centers. All
liability for damage resulting from work not carried out by
professionals is declined.
Fire Safety Precautions
In case of fi re, use carbon dioxide (CO
Do not use water or dry powder extinguishers.
Key to machine components (Page 2)
1
Water tank
2
Power button
3
Power light
4
Brew button
5
Machine ready light
6
Steam button
7
Hot water / steam knob
8
Brew unit
9
Steam wand (Pannarello frother)
10
Power cord
11
Drip tray + grill
12
Full tray indicator
13
Cup stacking surface
14
Portafi lter
15
Ground coffee fi lter basket
(for one or two coffees)
16
Ground coffee measuring scoop
17
Pod adapter
18
Pod fi lter
4

MACHINE INSTALLATION

For your safety and that of others, follow the "Safety
Regulations" in section 3 carefully.
4.1
Packaging
The machine's original packaging has been designed to
protect it during transportation. We recommend keeping
the packaging carton for possible future transportation.
) extinguishers.
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ri9330/01

Table des Matières