Battery Replacement - WOHLHAUPTER 510 digital Série Mode D'emploi

English
Description of the
Battery charge display
z
(Low batterie)
"–" symbol
u
Decimal point for decimal display
i
Readout in mm
o
z
u
i
Description of the
Battery charge display
z
(Low battery)
"–" sign
u
Comma for inch display
i
Value displayed in inches
o
• Adjustment travel: 1.2 mm (.047") radial
• Display resolution: 0.002 mm (.001") in Ø
• Working temperature: + 10 °C to + 40 °C
• Storage temperature: – 10 °C to + 65 °C
• The integrated electronics comply with
protection class IP 65
ü
fig. 4
14
metric display
o
inch display

3.3 Battery replacement

The two integrated batteries have a service
life of approx. 5500 setting cycles. We
recommend having spare batteries available
at all times. When the "Low battery" symbol
appears on the display, the batteries will
last for about another 50 setting cycles.
When the "Low battery" display flashes, the
batteries are empty and must be replaced.
Open the battery compartment
Torx 20 service key, remove old batteries
and dispose of them properly. When chan-
ging the batteries, the gasket in the access
cover "0" must be inspected and replaced
in case of damage to prevent the penetrati-
on of coolant into the battery compartment.
This precision boring tool must only be ope-
rated with batteries of the following
VARTA V392 SR 41 Sil ver oxide / Zinc /
KOH­Electrolyte.
Only these batteries have been tested with
regard to high centrifugal forces.
Please dispose of old batteries properly.
» 5 p 1
with a
p
2