Audiovox Rampage ACD-24 Manuel De L'utilisateur page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

travelling in a new area where you are not familiar
with the local stations.
bo bo bo bo bo
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band,
use the following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the
Manual Up/Down or Automatic Seek Tuning
Controls
3. Press the pre-set button ("1-6") to be set and
continue to hold it in. After approximately 2
seconds, the pre-set number will appear on the
display panel, indicating that the station is now
set into that pre-set memory position. The station
can now be recalled at any time by pressing
that button.
4. Repeat the above procedure for the remain in
pre-sets on that band and for the other 4 bands
on the unit.
bp bp bp bp bp
LIQUID CRYSTAL DISPLAY PANEL
FUNCTIONS
The Liquid Crystal Display (LCD) panel displays the
frequency, time, and all activated functions, including
five bar graphs which provide a visual representation
of the volume level and the left and right channel
balance levels. The volume level is represented by
three thin bar graphs. As the volume is increased,
the number of illuminated segments will increase.
The left and right channels are represented by the
wider bar graphs. As the strength of the signal ap-
plied to either the left or right channel increases, the
number of illuminated segments will increase.
NOTE: It is a characteristic of LCD panels that, if
bq bq bq bq bq
DISC SLOT
With the label surface facing up, gently insert the
disc into the slot until the soft-loading mechanism
engages and disc play begins. The
illuminates and becomes animated, the
symbol lights, and the track number and elapsed
time will appear on the display panel.
CAUTION: This unit is designed for play of
7 7 7 7 7
7 7 7 7 7
bm
.
subjected to cold temperatures for an
extended period of time, they may take longer
to illuminate than under normal conditions. In
addition, the visibility of the numbers on the
LCD may slightly decrease. The LCD
read-out will return to normal when the
temperature increases to a normal range.
standard 5" (12cm) Compact Discs
ONLY. Do not attempt to use 3" (8cm)
br br br br br
TRACK SELECT
These buttons are used to quickly select the beginning
of a particular track. With each momentary tap of
the Forward Track Select button (+
higher track number will be selected as shown on the
display panel. Similarly, with each momentary tap of
the Backward Track Select button (
lower track number will be selected.
bs bs bs bs bs
CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the
disc can be made by the Cue and Review functions.
Press and hold the Cue button (+
rapidly in the forward direction or the Review button
(
-) to advance rapidly in the backward direction.
During either function, the elapsed time within each
track will automatically be shown on the display panel.
bt bt bt bt bt
CD TRACK ONE POSITION (TOP) SELECTOR
During disc play, press this button to return to begin-
ning of first track on disc. Disc counter will return to
zero and "TRACK" number 01 will appear on dis-
play panel.
bu bu bu bu bu
REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the play
of the selected track ("RPT" will appear on the
display panel). Play of the track will continue to
repeat until the button is pressed again and the "RPT"
indication disappears from the display panel. Repeat
Play mode will also be cancelled by activating the
Random Play
cl cl cl cl cl
RANDOM PLAY SELECTOR (SHF)
During disc play, press this button to play the tracks
on the disc in a random or shuffled order ("RND")
will appear on the display panel). In Random Play
mode, pressing the Forward Track Select (+
or Backward Track Select (
tracks in a random order instead of the normal pro-
gression.
Additional presses will select tracks in
random order. The Random Play mode can be
indication
cancelled by pressing the button again ("RND")
IN
indication will disappear from the display panel) or
by activating the Repeat Play
functions.
cm cm cm cm cm
TRACK SCAN (SCN)
During disc play, press this button to play the first 10
seconds of each track on the disc ("SCAN" will ap-
CD-Singles in this unit, either with or
without an adaptor, as damage to the
player and/or disc can occur. Such
damage will not be covered by the
Warranty on this product.
-), the next
) to advance
cl
cm
or Track Scan
functions.
-) will also select
bu
or Track Scan
128-5780E
8 of 48
), the next
)
cm

Publicité

Table des Matières
loading

Table des Matières