Audiovox Rampage ACD-24 Manuel De L'utilisateur page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3,
etc.) may appear on the display panel. This can indicate a number of problems with the unit,
including a mechanical error or an error in the microprocessor control of the player. If an error
code should appear, try ejecting and re-loading the disc into the player. While the disc is out of
the unit, make sure it is clean, undamaged, and loaded correctly (label surface up). You may
also try activating the RESET button
memories.
If the suggested measures do not solve the problem, contact an approved warranty station near
you for further assistance.
If a problem should develop while operating the CD changer, the following error codes may
appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make sure
the discs are clean, undamaged, and loaded correctly (refer to the Owner's Manual of the CD
changer). Re-load the magazine and check for proper operation. You may also try activating
the RESET button
If the suggested measures do not solve the problem, contact an approved warranty station near
you for further assistance.
13 13 13 13 13
CD PL
CD PLA A A A A YER ERR
CD PL
YER ERR
YER ERR
YER ERROR CODES
CD PL
CD PL
YER ERR
dm
on the unit, but this will also erase the time and pre-set
CD CH
CD CH
CD CHA A A A A NGER ERR
NGER ERR
NGER ERROR CODES
NGER ERR
CD CH
CD CH
NGER ERR
CD CH
CD CH
CD CHA A A A A NGER ERR
CD CH
CD CH
NGER ERROR CODES
NGER ERR
NGER ERR
NGER ERR
dm
on the unit, but this will also erase the time and pre-set memories.
OR CODES
OR CODES
OR CODES
OR CODES
OR CODES
OR CODES
OR CODES
OR CODES
OR CODES
OR CODES
OR CODES
OR CODES
128-5780E
14 of 48

Publicité

Table des Matières
loading

Table des Matières