Panasonic CF-VDRRT3W Mode D'emploi page 16

Dvd-rom cd-r/rw drive
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installing the Software
Installation
CAUTION
Make absolutely sure that the software is installed under the authority of the admin-
istrator. Similarly, ensure that B's Recorder will be started up for the first time after
installation under the authority of the administrator.
See page 15 before using Media Player under Windows 2000.
Do not install the software using a drive other than this drive. Be sure to connect this
E
drive to your computer, and then insert the disc for installation.
Do not lose the serial number marked on the CD case.
1
Insert the Utility Disc into the drive.
(Setup starts up automatically, and the startup screen (setup menu) appears.)
NOTE
When the setup program will not run automatically, input [x:\Asmenu] in [start] -
[Run] and select [OK].
("x" is the drive letter of the drive. Change this to match the drive letter on your
own computer.)
2
Install [B's Recorder GOLD] and [B's CLiP] by selecting [BHA Recording
Software].
The installer of the software now starts so follow the on-screen instructions.
During the course of the installation process, you will be asked to input your name and
company and a serial number. Input any name and company and the serial number marked
on the case.
NOTE
During the installation, if the DirectX 9.0c installation screen is displayed, be
sure to select [Yes].
After completing the installation, be sure to restart the computer.
3
Install PowerDVD by selecting [CyberLink DVD Player].
The installer of the software now starts so follow the on-screen instructions.
Windows 2000
When [Installation complete. Would you like to execute the system Diagnostics Program
now?] is displayed, select [No].
16

Publicité

Table des Matières
loading

Table des Matières