Installation Preparation; Parts Supplied; Materials You Will Need; Tools You Will Need - GE ZBD1850 Série Mode D'emploi

Installation Preparation

PARTS SUPPLIED:

■ Two #8 Phillips head wood screws, 5/8" long to
secure dishwasher to underside of countertop
(in literature package).

MATERIALS YOU WILL NEED:

■ Ferrule, compression nut and 90° Elbow (3/8" NPT
external thread on one end, opposite end sized to
fit water supply)
■ Thread seal tape
■ UL Listed wire nuts (3)
Materials For New Installations Only:
■ Air gap for drain hose, if required
■
Waste tee for house plumbing, if applicable
■ Electrical cable or power cord, if applicable
■ Screw type hose clamps
■ Strain relief for electrical connection
■ Hand shut-off valve
■
Water line 3/8" min. copper
■ Coupler for extending drain line, if applicable

TOOLS YOU WILL NEED:

■ Phillips head screwdriver
■ 5/16" and 1/4" nutdriver
■
T25 torque driver (PDW__II only)
■ 6" Adjustable wrench
■ Level
■ Carpenters square
■ Measuring tape
■
Safety glasses
■ Flashlight
■ Bucket to catch water when flushing the line
■ Gloves
For New Installations Only:
■ Tubing cutter
■
Drill and appropriate bits
■ Hole saw set
2 Wood Screws
Hand
90° Elbow,
Ferrule and
Valve
Compression Nut
Electrical Cable
Waste Tee
(or Power Cord, if applicable)
Air
Screw Type
Gap
Hose Clamps
Phillips
1/4" and
Head
5/16" Nutdriver
Screwdriver
6" Adjustable
T25 Torque
Driver Wrench
Flashlight Safety Glasses
Gloves
Bucket
Thread
Wire Nuts (3)
Seal Tape
Hot Water Line
Strain Relief
Level
Tubing Cutter
Measuring Tape
Hole Saw Set Drill and Bits
Coupler
Carpenters
Square
3