Eliminating Malfunctions; Maintenance And Cleaning - Festo 8064073 Notice D'utilisation

Wiring example emergency light module -T1 with electronic ballast and 2 lamps


11 Eliminating malfunctions

Problem
The circuit is not working
The status LED does not come on.

12 Maintenance and cleaning

The device is maintenance-free. Use a slightly damp, lint-free cloth for cleaning without any abrasive,
chemical or solvent-containing cleaning agents.
If the device is not used for a longer period, charge the battery fully at regular intervals.
© Festo Didactic 8064074
Cause/solution
• Check supply voltage
• Battery not sufficiently charged.
• Check the wiring.
• Check supply voltage
• Check the wiring
• Emergency light module defective. Contact our Service department
33