Beurer EM 26 Mode D'emploi page 24

Masquer les pouces Voir aussi pour EM 26:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
Do not use the device again until the reddening has dis-
appeared.
• If the skin becomes irritated over longer treatment times,
select a shorter application time instead.
• If more serious skin irritation occurs, stop the treatment
and seek medical assistance.
• This device is not intended for use by children or people
with restricted physical, sensory (e.g. reduced sensitivity
to pain) or mental skills or a lack of experience and/or a
lack of knowledge, unless they are supervised by a per-
son who is responsible for their safety or are instructed
by such a person on how to use the device.
• Keep packaging material away from children (risk of suf-
focation!).
• Do not use any additional parts that are not recommend-
ed by the manufacturer.
• Do not move the cuff or put it on if the control unit is
switched on.
• Only connect the connection cable for the electrode plug
to the intended control unit and the cuff that is included.
• Do not pull on the connection cables during treatment.
• Do not bend or pull on the end of the connection cable.
• Do not wear any electronic devices, such as watches,
while using the device.
Precautions
Warning
• During the initial few minutes, use the device while sitting
or lying down to minimise the risk of injuries as a result of
isolated cases of vagal responses (feeling of faintness). If
you feel faint, switch off the device immediately, lie down
and support the legs in an elevated position (approx. 5 –
10 min).
• The treatment should be comfortable. If the device does
not work properly, or you feel unwell or experience pain,
stop using it immediately.
• Only remove the cuff once the device has been switched
off.
• Do not use the device near (~ 1 m) shortwave or micro-
wave devices (such as mobile phones) as these may
cause fluctuations in the output values of the device.
• The use of the device may be limited in the presence of
electromagnetic disturbances. This could result in issues
such as error messages or the failure of the display/de-
vice.
• Avoid using this device directly next to other devices or
stacked on top of other devices, as this could lead to
faulty operation. If, however, it is necessary to use the
device in the manner stated, this device as well as the
other devices must be monitored to ensure they are
working properly.
• The use of accessories other than those specified or
provided by the manufacturer of this device can lead to
24

Publicité

Table des Matières
loading

Table des Matières