Efco DS 2200 Manuel D'utilisation Et D'entretien page 6

To correctly use the brush cutter and prevent
accidents, do not start work without having
first carefully read this manual. You will find
explanations concerning the operation of the
various parts plus instructions for necessary
checks and relative maintenance.
Note: Illustrations
in this manual may vary according to
Country requirements and are subject to
change without notice by the
manufacturer.
THE OPERATOR'S MANUAL
Your operator's manual is for your protection.
READ IT. Keep it in a safe place for reference.
Know what you are doing before you begin
assembly of the unit. Proper preparation and
upkeep go hand-in-hand with satisfactory
performance of the brush cutter and safety.
Contact your dealer or the distributor for your
area if you do not understand any of the
instructions in this manual.
In addition to the operating instructions, this
INTRODUCTION
and specifications
manual contain paragraphs that require your
special attention.
Such paragraphs are marked with the
symbols described below:
Warning: where there is a risk of an accident
or personal injury or serious damage to
property.
Caution: where there is a risk of damaging
the machine or its individual components.
WARNING - To ensure safe and
correct operation of the brush
cutter, this operator's manual
should always be kept with or
near the machine. Do not lend or
rent your brush cutter without the
operator's instruction manual.
WARNING: Allow only persons
who understand this manual to
operate your brush cutter.
en
3