Efco DS 2200 Manuel D'utilisation Et D'entretien page 27

• When trimming and clearing you should
use less than full throttle so that the cord
lasts longer and to reduce the wear on the
trimmer head.
en
Cutting
• The trimmer is ideal for cutting grass that
is difficult to reach using a normal lawn
mower. Keep the cord parallel to the ground
when cutting. Avoid pressing the trimmer
head against the ground as this can ruin
the lawn and damage the tool. (Fig. 15)
• Do not allow the trimmer head to constantly
come into contact with the ground during
normal cutting. Constant contact of this
type can cause damage and wear to the
trimmer head.
Sweeping
• The fan effect of the rotating cord can be
used for quick and easy clearing up. Hold
24
OPERATION
the cord parallel to and above the area
to be swept and move the tool to and fro.
(Fig. 16)
• When cutting and sweeping you should
use full throttle to obtain the best results.
WARNING:
visibility is poor or in very high
or low temperatures or in freezing
weather.
WARNING: If the cutting tool or
deflector becomes clogged or
stuck, always turn off the engine
and make sure the cutting tool
has stopped before cleaning.
Grass, weeds, etc. should be
cleaned off the cutting tool at
regular intervals.
Never cut when