Intended Use; Technical Data - EINHELL GC-LC 1815 T Mode D'emploi D'origine

•
Original Operating Instructions
•
Safety information
•
Cordless pole-mounted pruner
•
Accessories

3. Intended use

The pole-operated pruner (telescopic branch
chainsaw) is designed for lopping off tree bran-
ches. It is not suitable for extensive sawing work,
felling trees or sawing any materials other than
wood.
The equipment may be used only for its intended
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufactu-
rer will be liable for any damage or injuries of any
kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.

4. Technical data

Cutter bar length: ................................... 242 mm
Max. cutting length: ................................ 200 mm
Chain pitch: .................................... 3/8", 33 teeth
Chain thickness: ......................... (0.043") 1.1 mm
Sprocket wheel: ............................... 6 teeth, 3/8"
Cutting speed at rated rpm: .................170 m/min
Oil tank capacity: ...................................... 20 cm
Net weight without cutter rail + chain: .........4.2 kg
Saw chain: Oregon/91VG033X,Oregon/91P033X
............... Oregon/91PJ033X, Oregon/90JG033X,
............................................... Oregon/90PX033X
Cutter bar: ......... Oregon 084LNEA089 (552737);
........................ Hong Guang HH6-Y33-50-ML06K
Protection class: ................................................III
Lithium-ion battery Einhell GC-LC 1815 T
Voltage: .................................................. 18 V DC
Capacity: ................................................... 1.5 Ah
Charging unit Einhell NG-GC-LC 1815 T
Input voltage: ..................... 100-240V~, 50/60 Hz
Power rating: ............................................... 50 W
Output voltage: ....................................... 21 V DC
Output current: ............................................ 1.8 A
Anl_GC_LC_1815_T_SPK7.indb 21 Anl_GC_LC_1815_T_SPK7.indb 21
GB
Danger!
Sound and vibration
L sound pressure level ....................... 79 dB(A)
pA,d
K uncertainty ........................................ 3 dB(A)
pA
L sound power level ........................ 100 dB(A)
wA,d
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with ISO 22867.
Handle under load
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect condi-
tion.
•
Maintain and clean the equipment regularly.
•
3
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
- 21 -
= 2.0 m/s
2
h
2
30.06.2017 10:38:08 30.06.2017 10:38:08