Télécharger Imprimer la page

Flip-Back Height Adjustable Armrests; G.adjustable Locking Flip-Up Armrests; H.articulating Legrest Or Elevating Legrest; Fixed Front Footrests - Quickie 2 Manuel D'instructions

Publicité

Les langues disponibles

Les langues disponibles

E N G L I S H
F. FLIP-BACK HEIGHT-ADJUSTABLE ARMRESTS (optional)
Flip-back height adjustable armrests are installed at Sunrise.
1. Height Adjustment
a. Release the upper securing lever.
b. Slide armpad up or down to desired height.
c. Return lever to locked position.
2. Flipping Armrest Back and Removing Armrest
a. Depress the release latch and pull arm toward back of wheelchair.
b. To remove, pull up on armrest. Pin securing armrest will automatically release.
c. To return armrest to operating position, push armpad down until it locks firmly into place.
G. ADJUSTABLE-LOCKING FLIP-UP ARMRESTS
(optional with depth-adjustable back only)
1. Adjustment
a. Loosen clamp bolts (A).
b. Move clamp up or down backrest posts to desired position.
c. Tighten bolts.
2. Angle-Adjustment
a. Loosen bolt (B).
b. Set armrest at desired angle using preset holes in armrest angle plate (C).
c. Tighten bolt.
H. ARTICULATING LEGREST OR ELEVATING LEGREST
1. Installation
To install or remove articulating legrest (ALR) or elevating legrest (ELR) see instructions for swing-
away hangers and footrests.
2. Adjustment
a. To raise legrest, lift to desired position. Legrest will automatically lock in place.
b. To lower, while seated in chair, press release lever forward and lower legrest to desired position.
Legrest will automatically lock in place.
I. FIXED FRONT FOOTRESTS (Quickie 2HP Only)
16
1. Adjustment
a. Remove mounting bolts on the top of each extension tube.
b. Make sure the inserts remain in place.
c. Slide footrest tube into front frame tube to desired height.
d. Line up holes and replace the bolt on the outside through frame, footrest and insert.
e. Follow same procedure on opposite side.
f.
Align footrests to desired inward/outward rotational position and tighten firmly.
109881 Rev. B
12
13
14
15
(optional)
16
12
1
2
4
6
5
3
1. Armrest Pad
2. Upper Securing Lever
3. Release Latch
4. Armrest Panel
5. Rear Receiver
6. Armrest Release Pin
13
B
C
A
14
Articulating
Legrest
15
Elevating
Legrest
16
I X .

Publicité

loading

Ce manuel est également adapté pour:

2hp